기타용품

본문 바로가기
TODAY VIEW
[해외]Alvord Polk 652-0 High-Speed Steel Repairmans Reamer, Straight Flute, T-Handle Shank (103-T), Uncoated Finish, 1/8 Inch Point Diameter, 1/2 Inch Large End Diameter
기타용품
[해외]Alvord Polk 652-0 High-Speed Steel Repairmans Reamer, Straight Flute, T-Handle Shank (103-T), Uncoated Finish, 1/8 Inch Point Diameter, 1/2 Inch Large End Diameter 요약정보 및 구매

상품 선택옵션 1 개, 추가옵션 0 개

제조사 Alvord Polk
상품코드 n1539334707982
판매가격 94,000원 79,000
적립금 0원
브랜드 Alvord Polk 브랜드 바로가기
사이즈차트 사이즈차트
배송비결제 무료배송
필수 선택입니다.
옵션선택

- 해외에서 고객님께 직배송되는 구매대행 상품입니다.

- 주문확인으로부터 배송완료까지 약 7~20일 정도 소요됩니다.

- 해외주문완료~현지물류창고검수 중 반품 시 현지반품비용이 발생됩니다.

- 국제배송~배송완료 중 반품 시 현지반품비용+EMS비용+국내 택배회수비가 발생됩니다.

- 세관통과 후 국내택배 배송조회가 가능합니다.

- 현지상황이나 택배사 사정에 따라 배송기간이 연장될 수 있으며, 해외소싱사이트 세일 등 물량이 늘어나는 기간에는 평소 배송일보다 3~5일 이상 지연될 수 있습니다.

- 타쇼핑몰과 중복으로 해외구매를 할 경우 통관 날짜가 같으면 관/부가세가 부과됩니다. (비슷한 시기에 다른 사이트에서 해외 제품을 주문할 경우 통관일정이 겹칠 수 있습니다.)

- 단순변심에 의한 교환/반품의 경우 고객님 부담으로 교환/반품이 진행됩니다.(단, 상품이 개봉되었거나, 파손되었을 경우 반품 불가함)

- 오배송/불량/파손의 경우 구매후 1개월이내 환불/교환 가능합니다. (증빙자료 있을 시)
- 가전제품의 경우 해외배송상품은 110V 전압 상품입니다. 상품수령후 반드시 사용전압 확인후 변압기 등을 이용해 주시기 바랍니다.(전압 미확인에 따른 파손은 보상되지 않습니다)

- 주문이 완료되었더라도 간혹 해외 판매처의 품절 또는 가격인상 등으로 인해 구매가 진행되지 않을 수 있습니다. 이 경우 고객의사에 따라 별도의 환불안내를 드립니다.

위시리스트

상품 정보

단위환산기 수치를 입력하시면 자동환산됩니다. 사이즈 확인 시 참고하세요.
inch = cm
lb = kg
41qbCtYZZML.jpg
Alvord Polk 652-0 High-Speed Steel Repairmans Reamer, Straight Flute, T-Handle Shank (103-T), Uncoated Finish, 1/8 Inch Point Diameter, 1/2 Inch Large End Diameter


31JhvdTKseL.jpg

31MefQThd-L.jpg

31jS2nyssBL.jpg

41qbCtYZZML.jpg
3/8"-3/4"-Inch

Product Description

The Alvord Polk 652-0 straight flute repairmen’s reamer is a T-handle shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for deburring a drilled hole. Repairmen’s reamers can also be used to countersink a hole.

Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials.

There are six flutes for all reamers in this series. The T-handle is included in the purchase price of this reamer.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.


Feature

Straight flute reamers are recommended for general purpose reaming to make minor enlargements to existing holes with a very precise size and roundness
Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
T-handle shanks allow for increased leverage when operating the tool by hand
Uncoated (bright) tools have no finish or coating. They are a good choice for general purpose applications
High-speed steel is a common general purpose steel for cutting tools, is compatible with a variety of materials, and tends to be lower in price than cobalt steel or carbide
Brand : Alvord Polk
Item model num : 08021
MPN(PartNumber) : 04001
EAN : 0662783040019
Package Dimensions(LxWxH) : 17x13x2cm ; 68 g
do not remove - ntos connect log tag
구매 시 참고용으로만 이용해주십시오.
이 제품은 구매대행을 통하여 유통되는 제품임
이 제품은 「전기용품 및 생활용품 안전관리법」에 따른 안전관리대상 제품임

구매후기

구매후기

구매후기가 없습니다.

상품문의

상품문의가 없습니다.
상단으로
010-5482-4622
평일 AM 10:00 ~ PM 5:00
점심시간 PM 12:00 ~ PM 1:00
무통장입금안내
농협 302-5283-1377-21 이상지
해외 사이트에서 상품을 대량 소싱하는 쇼핑몰 특성상 일부 상품이 상표권 및 지적재산권을 침해하게 되는 경우가 발생할 수 있습니다. 고객센터로 연락주시면 최대한 빠르게 처리하겠습니다.
회사명 상지서비스 | 대표 이상지 | 주소 충남 천안시 동남구 성황로 40 111동 1703호 | 전화 010-5482-4622
반품배송지 31127 충남 천안시 동남구 성황로 40 111동 1703호 (TEL: 010-5482-4622)
사업자등록번호 678-17-00723
| 통신판매업신고번호 제2018-충남천안-0554호 | 개인정보보호책임자 이상지 (sangi0611@naver.com)
호스팅제공자 (주)스마일서브 | 서버소재지 서울시 금천구 가산디지털1로 33-33 대륭테크노타운 2차 2층

Copyright © 2024 상지서비스. All Rights Reserved.

글로벌셀러창업연구소인증 구매대행쇼핑몰
서울보증보험가입 공정거래위원회표준약관사용
K사다리